3mm Prop Saver w/ Adapter & 3 bands
An excellent device for saving your propellers on those bumpy landings or dodgy take-offs.
The prop saver has a 3mm size shaft, and comes with a bushing to fit most propellers.
This prop saver now comes with 2 additional high grade button head cap screws
and 6 of our prop saver bands Prop Adapter sizes are as follows, !!!
all three sizes on the same prop saver !!!
5.5mm (.216) Dia fits 8 X 4.3 and 8 X 3.8
7mm (.276) Dia fits 9 x 5 DD (EP9050), GWS 1060 DD
8mm (.315) Dia Fits 9 x 4.7
it also has 3 rubber O-Ring bands.
Note: Color may vary from the photo.
CAUTION: When using prop savers and bands on larger motors in the 150 Wat range use caution. If you hear the prop pulling away from the hub during 3D and other extreme maneuvers add another band as a safety measure. Never run a prop up to RPM with people in front of the prop or to the side in the arc of the prop. I have witnessed people going off for stitches with direct mounted props as well as prop savers. All I have witnessed were due to improper safety on the pilots part.
