Yak-55 kits
9mm White EPP 1.3# $$$ We now have Free Shipping on orders over 75.00 $$$Applies to the Lower 48 States only. There will be an additional shipping charge to outlying areas.
This plane was designed by Leadfeather from RcGroups. The Yak flies like one of the depron yaks but has the "bouncability" of EPP. This plane
has been a hit everywhere it flies. It is great for learning 3D as well as for a pro flyer. These kits are being made available with the permission and support from LEADFEATHER from RC groups. Be sure to check out the
forum here and the
build guide here.
Kit Contents Overview
Note: We are building these kits to order.
The current build time is 2 days for unpainted and 3 days to 1 week for painted.
If you are able to order and don't run into a sold out page, that means that you are in a build group of 25 or less.
This is necessary to keep us from getting over run with orders.
- The parts are all cut by hand from 9mm #1.3lb EPP and have alignment tabs for easier building.
- The kit consists of all the foam pieces pre-cut with control surfaces pre-beveled and hinges glued.
- Aileron servo cutout in fuse for 9 gram servo pre-cut to speed assembly.
- The wing spar slot is pre-cut into the bottom of the wing and elevator. Spars installation option see item details below.
- All Hinges and Spars Glued with Welder Adhesive.
- Shipping to lower 48 states USA only.
We can ship world wide, call or e-mail for special quote on shipping.
Specs for the Yak-55
Wing Span: 32.5
All up Weight: 6.5 to 7oz
Color Choices: are as follows: You need to pick a Main color, Flame Color and a highlite
Main Color/ Flame Color:Blue, Yellow, Green, Red, Black, FL Violet, FL Raspberry, FL Green, FL Yellow, FL Hot Pink, FL Orange
Highlight / Flame outline: Black, Red
Blue
Yellow
Green
Red
Black
Fluor Violet
Fluor Raspberry
Fluor Green
Fluor Yellow
Fluor Hot Pink
Fluor Orange
We are currently working on a system where you can select all color choices online. If your color choice is not available, feel free to give us a call. We will be happy to take your order over the phone. 616-667-1809
Suggested Parts List for this plane
New for 2010
Improved Ailerons for increased roll rate
Just Released 4-18-2010: New Neon Orange Blue Flame Paint Job
Wooden Control Horn Upgrade is now available. This upgrade must be purchased with the plane and will be substituted in place of the plastic pin horns and wood base.
3.75
| |
| 1) EPP Yak55 Bare Unpainted Foam Only Kit | #Yak55-001
$22.95
|
32.5 inch wing span
|
This
Foam Kit comes just as it is stated. All parts cut unpainted, the
grooves for the spar in the tail as well as the wing are cut (no Carbon Fiber). Aileron and elevator hinges
pre-glued with welders adhesive. This kit works great if you already
have the components from
another plane and want to transfer them over to a new airframe.
Note: all
painted and unpainted kits will have WMParkFlyers.com on the underside of the wing.
|
| 2) EPP Yak55 Unpainted Foam W / Spars Kit | #Yak55-002
$29.95
|
32.5 inch wing span
|
This
Foam W/ Spar Kit comes just as it is stated. All parts cut unpainted, the
grooves for the spar in the tail as well as the wing are cut and carbon fiber spars are installed. Aileron and elevator hinges pre-glued with welders adhesive. This kit works great if you already have the components from
another plane and want to transfer them over to a new airframe.
Note:
all
painted and unpainted kits will have WMParkFlyers.com on the underside of the wing.
|
| 3) EPP Yak55 Unpainted Foam W / Spars Short Kit | Yak55-003
$39.95
|
32.5 inch wing span
|
The
Short kit comes with all parts cut unpainted, the grooves for the spar
in the tail as well as the wing are cut and carbon fiber spars are installed. Plus the carbon fiber, piano
wire pre-bent and control horns for the control linkages is
included. Aileron and elevator hinges pre-glued with welders adhesive.
Note:
all
painted and unpainted kits will have WMParkFlyers.com on the underside of the wing.
|
| 4) EPP Yak55 Red White and Blue Painted Foam only Kit |
Yak55 RWB-004
$42.95
|
32.5 inch wing span
|
This Painted Kit comes just as it is stated. All parts cut
painted, the grooves for the spar in the tail as well as the wing are
cut (no Carbon Fiber). This kit works great if you already have the
components from another plane and want to transfer them over to a new
painted airframe. Aileron and elevator hinges pre-glued with welders adhesive.
Note:
all
painted and unpainted kits will have WMParkFlyers.com on the underside of the wing.
|
5) EPP Yak55 Painted Foam W / Spars Short Kit
Comes with hardware shown below.
|
|
32.5 inch wing span
|
  |
The
Painted Short kit comes with all parts cut painted, the grooves for the
spar in the tail as well as the wing are cut and carbon fiber spars are installed. Plus the carbon fiber,
piano wire and control horns for the control
linkages is included. Aileron and elevator hinges pre-glued with welders adhesive.
Note:
all
painted and unpainted kits will have WMParkFlyers.com on the underside of the wing. |
| 5) EPP Yak55
Neon Orange/Blue Flame
Painted Foam W / Spars Short Kit | Yak55 painted short kit with spars-005
$59.95
Red White and Blue
Neon Orange Blue Flame
Red with black Flame
Red With Yellow Flame
Blue with yellow flame
|
32.5 inch wing span Shown assembled as reference (some assembly required)
|
Neon Orange Blue Flame Shown Below (Motor, Motor Mount and prop sold separately)
|
| 6) EPP Yak55 P-N-P Kit (Special
Order Only) | Yak55-006
159.95 |
32.5 inch wing span
We are not currently offering PNP Kits at this timeNote: PNP planes will now be built with a non removable wing and will be shipped Via Greyhound Express.You must be willing to pick this Item up at the Grey hound Express terminal. The planes will be balanced ready to install your receiver and battery and go flying. Free shipping does not apply to this item. Building the reinforced shipping carton and shipping will be an additional charge at checkout.The Plug N Play Kit comes complete assembled with a non removable wing
including all components painted, receiver ready. These planes are custom built to order.
please specify
color choice in the notes section of your order. | Components included in this assembly include the following: | | 1 | -005 yak short kit | 59.95
| | 1 | 2730-1500 outruner motor | 14.24
| | 1 | tower-pro ESC
| 14.36 | | 1 | stick mount | 2.39
| | 2 | 5 gram servos (tail feathers) | 5.65
| | 1 | 9 gram servo (ailerons) | 5.78 | Total Component Price
| 109.87 | Build Charge
| 50.08
| Total Price For the PNP ready to fly kit
| 159.95
|
|
 |
Velcro Strip Glued and Ready for your battery
| Velcro Glued and ready for your receiver
|
|
|
|
The Plug N Play Kit comes complete assembled with a non removable wing including all components and painted, receiver ready.This kit is special order only. These planes are custom built to order, please specify color choice in the notes section of your order
|